SMART Rear Projection SMART Board 1800, Руководство по установке

Страница: 17 / 62

RPSB 1800/1802 Installation Guide
11
Pen Tray Shelf Door
3. Slide the Pen Tray shelf out.
4. Place the eraser and styluses in the appropriate slots in the Pen Tray.
Installing the Keyboard
If you've been supplied with a wireless keyboard and infrared receiver, follow the procedure
below. Otherwise, set your regular keyboard on the left side of the Pen Tray shelf, and plug it
into your computer as usual.
To set up the wireless keyboard:
1. Set the keyboard on the left side of the Pen Tray shelf, directly in front of the infrared
receiver (already installed at the back of the Pen Tray shelf on the left side).
Pen Tray
Optional Flip Up Shelf
(Included with 1802)
Wireless
Keyboard
Volume
Control
Display
Mode Switch
(1802 only)
2. The infrared receiver cable is secured in place inside the cabinet on the lower-right
side (as you face the front of the cabinet). See the wiring diagram on page 10 for the
route of this cable.
3. Route the cable to the computer, out of the way of the projector light path. The
procedure for connecting the keyboard and mouse connectors to the appropriate ports
on the computer is described on page 17 (for the RPSB 1800) and page 27 (RPSB
1802).