Important Information
i
Important Information
This guide describes the installation of the SMART LightRaise™ projector mount on a
standard concrete or cinder block wall or a supported framed wall, as detailed on page 12. If
you have any other material cladding your wall (such as brick and masonry), consult
professionals with the appropriate expertise. We don't recommend installation on an
unsupported wall because writing on the SMART Board™ interactive whiteboard may cause
the boom to vibrate and interfere with the board's orientation.
A qualified service technician must install your LightRaise unit.
WARNING
The projector used with the SMART LightRaise projector mount is a high-brightness light source. Do
not view directly or stare into the beam of light created by the projector. Be especially careful to
instruct children not to look in the direction of, or stare at, the beam of light.
WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING
The SMART LightRaise unit is projector-specific. When you order your unit, the model of boom and
console as well as the projector mounting accessories are selected to match the projector you have
specified. Do not mount any other projector or equipment. Any other weight hung from the LightRaise
boom may cause the boom to bend or break, which can injure anyone beneath it.
WARNING for European Customers
The SMART LightRaise console should be used
only
with European TN and TT power distribution
systems.
It is
not
suitable for older, IT-type power distribution systems found in some European countries.
"This
system (IT-type) is widely used isolated from earth, in some installations in France, with impedance to
earth, at 230/400V, and in Norway, with voltage limiter, neutral not distributed, at 230V line-to-line."
(IEC60950:1999
)
Contact qualified personnel if you are uncertain of the type of power system available where the
SMART LightRaise unit is to be installed.
