SMART LightRaise Installation and User's Guide
15
To remove the console bracket from the console:
1
Use the hex security key to unscrew the two ¼" security hex socket button head cap
screws from the inside of the console. These screws hold the console bracket to the
console.
Keep these security screws with the console until you are ready to hang the console on
the bracket (see page 37).
To mark the wall for the console bracket
1
Decide where you want to mount the LightRaise projector mount and your SMART Board
interactive whiteboard. Draw a vertical line down the center of this location. Use the level
to ensure this line is straight and plumb.
NOTE:
The centerline must be 3'
(91.4 cm)
from any wall obstructions, such as a light
switch.
2
Use the measuring tape to measure 23¾"
(60.3 cm)
from the floor at the centerline. Mark
the wall at this location. Approximately 18"
(45.7 cm)
to one side of the centerline,
measure the same height. Mark the wall at this location.
Floor
Centerline
Where you want a SMART
Board interactive whiteboard
(optional)
18" (45.7 cm)
Where you want the console
Approximately
Exactly
from the Floor
Marks for
Template
Tool
