Sleipner VECTOR FINS VF650, Руководство по установке, Страница: 55 / 68

55
5251 5 2022
-
SPS-B
Start-Up
Stabilizer settings (Scroll down menu) continues:
4. THRUSTER ON HANDLING NO HANDLING
SUSPEND ON
Select if thruster(s) and stabilizers should be operating simultaneously (reduced thruster performance), or if the stabilizers should centre and go to
suspend mode during thruster operation.
5. CRUISING P value
6. CRUISING I value
7. CRUISING D value
8. AT ANCHOR value
9. AT ANCHOR P value
10. AT ANCHOR CENTRE value
11. SPEED THRESHOLD value
12. SPEED FACTOR value
13. OPTION 1 value
14. OPTION 2 value
15. OPTION 3 value
16. OPTION 3 value
17. OPTION 4 value
18. OPTION 5 value
19. OPTION 6 value
20. OPTION 7 value
21. OPTION 8 value
These settings are boat dependant and necessary to achieve optimum performance of the system for a given application. Settings are to be changed
only when requested by authorized SP personnel.
Then, proceed to the tab Fin/Actuator settings
MC_0244
MG_0273
Fin/Actuator settings (Scroll down menu)
1. STOP ANGLE value
2. FIN POSITION P FACTOR value
3. FIN POSITION I FACTOR value
4. FIN POSITION D FACTOR value
These settings are boat dependant and necessary to achieve optimum performance of the system for a given application. Settings are to be changed
only when requested by authorized SP personnel.
5. FIN ACT TYPE select actuator
6. FIN TYPE select fi n
Select the actuator and fi n size installed in Detect End-stop section.
Pre-STARTUP is now completed. Go to STARTUP.
Start-Up
MC_0244
MG_0274