manualshive.com logo in svg

Sleipner VECTOR FINS VF650, Руководство по установке, Страница: 2 / 68

Поделиться
Скачать
Sleipner VECTOR FINS VF650 Скачать руководство пользователя страница 2

2

5251

5

2022

-

SPS-B

Sleipner Motor AS

P.O. Box 519, Arne Svendsensgt. 6-8

N-1612 Fredrikstad, Norway 

MC_0020

Contents

The installer must read this document to ensure necessary familiarity with the product before installation. 

Instructions in this document cannot be guaranteed to comply with all international and national regulations. It is the responsibility of the 

installer to follow all applicable international and national regulations when installing Sleipner products. 

The recommendations given in this document are guidelines ONLY, and Sleipner strongly recommends that advice is obtained from a person 

familiar with the particular vessel and applicable regulations.

This document contains general installation instructions intended to support experienced installers. If you are not skilled in this type of work, 

please contact professional installers for assistance.

If required by local regulation, electrical work must be done by a licensed professional.

Appropriate health and safety procedures must be followed during installation.

Faulty installation of Sleipner products will render all warranties given by Sleipner Motor AS.

MC_0038

Responsibility of the Installer

Installation Manual 

Responsibility of the Installer ...................................................................................................................................................................3

General Installation Considerations and Precautions Guidelines ......................................................................................................3 - 4 

 

Addition Supporting Manuals.................................................................................................................................................................. 5 

Key Components .................................................................................................................................................................................... 6 

Actuator Measurements ......................................................................................................................................................................... 7 

Vector Fin Measurements....................................................................................................................................................................... 8 

Measurement Clearance ........................................................................................................................................................................ 9 

Hull Forces ........................................................................................................................................................................................... 10 

Fin Positioning ...............................................................................................................................................................................  11 - 13 

Fin Modification Tunnel ends

 ................................................................................................................................................................ 14 

 

Mechanical  Installation ................................................................................................................................................................. 15 - 19 

 

Hydraulic Installation ..................................................................................................................................................................... 20 - 27 

 

Electrical Installation ...................................................................................................................................................................... 28 - 35 

S-Link System Description ................................................................................................................................................................... 36 

Electrical Installation ...................................................................................................................................................................... 37 - 41

 

Fin Installation ............................................................................................................................................................................... 42 - 49 

Fin Location Label ................................................................................................................................................................................ 50 

Fin System Interface...................................................................................................................................................................... 51 - 52 

 

Start-Up ......................................................................................................................................................................................... 53 - 59 

 

Sea Trial

 ........................................................................................................................................................................................ 60 - 61  

Fin Removal ......................................................................................................................................................................................... 62 

 

Installation Checklist ...................................................................................................................................................................... 63 - 64 

  

Service and Support........................................................................................................................................................................... 65

Product Spare Parts and Additional Resources .............................................................................................................................. 65

Warranty Statement ............................................................................................................................................................................ 65

Содержание VECTOR FINS VF650





































































Отзывы:

Нет отзывов