Sleipner PHC-3, Руководство пользователя, Страница: 3 / 32

3
5267 15 2022
-
PHC-3
Sleipner Motor AS
P.O. Box 519, Arne Svendsensgt. 6-8
N-1612 Fredrikstad, Norway
MC_0020
Contents
LED Status
MC_0199
Continuous GREEN Flashing GREEN
PHC-3 is powered and has S-link communication and there are no
faults
No S-link communication
Continuous RED
PHC-3 have a fault, enter ACTIVE FAULTS menu for details.
Panel Layout & Functions
MC_0198
Tank sensor
(level & temp)
Output to thruster valves
(Digital out put: DO-5 and
DO-6 also)
System pressure / PTO
pressure
Connects directly to Stabilizer
powerpack VFD by BUS
connection. Provides intelligent
VFD control and feedback of
actual fault messages and you
can also reset VFD from stabilizer
control panels.
S-link
connection
Page Up and Down
(Side to side)
ENTER/SAVE
Page BACK/CANCEL
Front panel LCD display and
button interface allow for local
confi guration of parameters
and info
LED
Status
Hydraulic cooling pump output
Stabilizer hydraulics connections
(dump, unload, PTO main valve)
Power (24V)
Power Cooling pump (24V)
Extra interfaces and specials,
including confi gurable outputs.
(Digital outputs: DO-1 to DO-4.
MC_0197
Product Features
• Normally, fi tted on Hydraulic tank (Power pack/Rack) delivered from the factory. Can be delivered separately also.
• Communicate over S-Link with SCU. (Stabilizer)
• Intelligent monitoring and logging of issues.
• Mostly Plug and play installation.
• Intelligent load control on generators.
• The new ECI cooling pump connects directly to the controller harness with a ready-made cable for simple installation. The PHC-3 controller
communicates with the pump unit, allowing variable flow control and advanced diagnostics.
• Local view and control.
• Waterproof IP65.