20
O
O
O
O
O
PERATION
PERATION
PERATION
PERATION
PERATION
Key Lock
To lock the buttons on your LCD remote control, press and release
,
then press and release "T", and the
icon will appear. To un-
lock the Key Lock, repeat these steps and the
icon will disap-
pear. This is helpful in preventing unintentional starts if your LCD remote
is in your pocket.
Inquiry
At any time, pressing the X button will display real-time temperature in
either
or
depending on which mode you have selected. If you have
two LCD remotes programmed to one snowmobile and any changes are
made on one LCD, the second LCD will not update with those changes
until you press its Inquiry "X" button.
Manual Remote Start
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
To manually remote start, press the "S" button on LCD remote. User will
be notified of a successful start by a three-note music tone and the ex-
haust cloud icon
will appear on the LCD screen. An unsuccessful
start will result in three short beeps of the same tone and no exhaust cloud
icon
appears on the LCD screen. With a successful start, the en-
gine will run for the programmed time in feature 1 of the features and op-
tions.
See chart page 17
.
During any mode of Remote Start, SledStart will cut the ignition of the
snowmobile if either the brake is applied or if the RPM's rise above pre-
set threshold, not allowing the snowmobile to be driven.
To operate the snowmobile from remote start mode, insert key in ignition,
turn one click to "RUN" position, and apply brake. Remote start mode is
now deactivated and snowmobile can be driven normally. CAUTION: Do
not turn key to "START" position, as starter damage may occur. To Can-
cel Manual Remote Start during operation, push "S" button again.
