15
P
PP
PP
ROGRAMMING
ROGRAMMING
ROGRAMMING
ROGRAMMING
ROGRAMMING
M
M
M
M
M
ODE
ODE
ODE
ODE
ODE
This section will be divided into two parts and will guide you through the
various settings the SledStart Remote Starter System offers.
Part 1 will describe how to select either Sound or Vibrate for the LCD re-
mote, LCD Backlight ON/OFF, using the Temperature/Auto Start feature,
setting the engine crank time, selecting Fahrenheit or Celsius modes, and
adjusting the clock.
Part 2 will describe the Features and Options section of the Programming
Mode.
NOTES ABOUT PROGRAMMING MODE
ALL programming must be done with the 2-way LCD remote. The one
way remote can not be used for programming.
If no buttons are pressed for thirty seconds during programming mode,
the system will exit programming.
After selecting and confirming any setting with the "S" button, you will
automatically exit programming.
To re-enter programming mode, press the
button for two seconds,
and programming will resume at the point where you last exited. The
button will also scroll to the desired feature.
At any time to exit programming without saving changes, press the
"X" button, or
to move to next selection. Changes will only be con-
firmed with the "S" button.
Replacing the AAA battery within 3 second of removal will retain all
of your previous custom settings.
PART ONE
To enter programming mode, press
for two seconds. You will hear a
single beep to confirm activation of programming mode. Remember…once
you confirm any setting with the "S" button you will exit programming. You
must Press the
button again for 2 seconds to re-enter the program-
ming mode.
Once in programming, press
repeatedly until the icon for your desired
function is flashing:
