19
Feature 5 - Lights Flashing/Constant
This feature will adjust whether the lights will flash or remain constant dur-
ing remote start. This feature should be left on Option 1 as the headlight
is always on when the snowmobile is running, not allowing for flashing to
occur. When Option 1 is selected, the user can hear the click from the
module relay in flashing mode to know if module is still active but ignition
has been lost.
CAUTION!!!
During the first minute after activating any mode of remote starting
(manual, temperature, timer) and the engine fails to start, or loses
ignition, SledStart will make two more attempts to start the engine.
If the snowmobile fails to start after 3 attempts SledStart shuts
down. If the engine shuts down after the one-minute window,
SledStart will not attempt to restart regardless of the number of
attempts made during initial start up. This feature is designed to
protect the engine from overheating. On many models, if the engine
has idled to a critical temperature, the snowmobiles ECM will shut
down the engine. If this happens within the one-minute window of
any remote start activation, ENGINE DAMAGE CAN OCCUR, as
SledStart will attempt to restart engine during that first one minute.
Please use caution and only use remote start modes on a cold en-
gine!
