Operating- and installation instructions
WAREMA Mobile System
WMS Wall-mounted transmitter basic
Keep for future use!
Valid from 01. October 2019
2018114_b•en•2019-10-01
Technische Änderungen behalten wir uns vor
1
CAUTIO
C
Never activate buttons on your WMS Wall-
mounted transmitter basic arbitrarily without
visual contact to the sun shading product.
Children must not play with this product –
remote controls or transmitters must not get
into the hands of children!
To ensure trouble-free operation of the unit,
Read these instructions carefully,
Learn the WMS wall-mounted transmitter basic into the
receivers
Check that the system is functioning correctly.
Commissioning
You can find instruction videos on our
YouTube channel
at:
http://www.youtube.com/user/SonnenLichtManager/videos
We recommend commissioning using the
WMS studio pro PC software.
The supplied battery is already inserted and the device
is ready to operate.
IUTCCE
O
To spare the button cell of the WMS Wall-
mounted transmitter basic during learning,
the waking time of the WMS Wall-mounted
transmitter basic was reduced to 1 minute. If
your device stops responding, simply wake it
up by pressing the Stop button, for example.
Tnstallation
The WMS Wall-mounted transmitter basic consists of a
mounting frame and control.
Attach the mounting frame to the wall using the
countersunk screws and dowels included.
Position the central frame/plate of the switch program
you require.
Clip on the wall-mounted transmitter.
Clipping the wall-mounted transmitter and central
frame/plate into the available snap-in latches will hold
them in place on the mounting frame.
IUTCCE
O
Only use countersunk screws so that the
screws are flush with the mounting frame and
the WMS Wall-mounted transmitter basic can
be securely clipped on.
IUTCCE
O
When planning the installation location, be
sure to allow enough space for the central
frame/plate that you require for your particular
installation.
The central frame/plate can be ordered as an
optional accessory if needed.
General information
Fig. 1 WMS Wall-mounted transmitter basic
The WMS Wall-mounted transmitter basic is used for the
remote control of WAREMA WMS receivers. The receivers
send a confirmation of the received commands, and the
wall-mounted transmitter indicates that it received the
confirmation.
The WMS Wall-mounted transmitter basic is a 1-channel
transmitter and supports five different product types
(awning, roller shutter, external venetian blind, window, light).
Only one receiver or a group of receivers of the same
product type can be actuated at any one time.
The comfort control functions can be switched on and off
via the WMS Wall-mounted transmitter basic.
Comfort positions can be saved at the press of a button.
If a control function is preventing operation of the product
(e.g. a wind alarm), this is also displayed on the WMS
Wall-mounted transmitter basic.
The transmitter is compatible with:
Additional information can be found at:
http://www.warema.de
works with
Tntended use
The WMS wall-mounted transmitter basic is an electronic
device developed to control WMS receivers. The approval
of the manufacturer must be obtained for uses outside of
the purposes listed in these instructions.
Safety instructions
CAUTIO
C
The WMS Wall-mounted transmitter basic is
for indoor use only. It is not water-proof.
