SkyWave SG-7100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 56

background image

SG-7100 - Hardware Guide

T300, Version 01 ii © SkyWave Proprietary

Legal Notice

This documentation is owned by SkyWave Mobile Communications Inc. (SkyWave) and protected by
applicable copyright laws and international treaty provisions. Other copyrighted names used are the property
of their respective owners. Therefore, you must treat this documentation like any other copyrighted material.
You may not make the documentation, or copies thereof, available in any manner or form, or use, copy or
transfer any part, to anyone outside your company.

If you received this documentation by electronic transmission or download, by installation or use of the
documentation, you acknowledge that you have read and understand this license agreement and agree to be
bound by its terms and conditions.

This documentation is provided on an as-is basis without any warranty of any kind. You assume the entire
risk as to the results or performance of the software. Under no circumstance shall SkyWave be held liable for
any direct, indirect, consequential, or incidental damages arising from the use or inability to use the software
or documentation.

All  trademarks  or  registered  trademarks  are  the  property  of  their  respective  owners.  INMARSAT,  the
Inmarsat logo and IsatData Pro are trademarks of Inmarsat used under license by SkyWave. Inmarsat is not
responsible  for  the  operation  and  regulatory  compliance  of  the  products  and  services  referred  to  in  this
document that connect to the Inmarsat system. Wi-Fi is a registered trademark of Wi-Fi Alliance. 1-Wire is a
registered trademark of Maxim Integrated™ Products Inc. Micro-Fit 3.0 is a Molex trademark. gpsOneXTRA
Assistance  is  a  trademark  of  Qualcomm  Incorporated.  Loctite  and  Threadlocker  Blue  242  are  registered
trademarks of Henkel.

Option NV materials are reproduced with permission of the copyright owner.

SkyWave reserves the right to make changes to products and or specifications without notice.

Contact Information

SkyWave Mobile Communications Inc.

Online:



Website

www.SkyWave.com

Online Documentation:



Login at

support.skywave.com

and follow the link to the downloads section

Customer Support by Email:



[email protected]

Customer Support by Telephone:



+1.613.836.2222

Documentation Feedback:

The Customer Documentation Department creates the SkyWave technical manuals.
Use the address below to tell us what you think about our technical documentation
and if you have suggestions for improvement.

In your feedback please reference a specific document number or title. We read all
feedback carefully, but please note that we cannot respond to the comments you
submit. If you require technical assistance, please contact SkyWave Customer
Support.



[email protected]

«
1
2
3
4
...
»

Содержание SG-7100

























































Отзывы:

Нет отзывов

Похожие инструкции для SG-7100

Бренд: Jäger Страницы: 50

Бренд: Jensen Страницы: 4

Бренд: Radionics Страницы: 14

Бренд: Panasonic Страницы: 1

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 20

FAREX SR MINI SYSTEM

Бренд: RKC INSTRUMENT Страницы: 82

Бренд: Albrecht Страницы: 52

SB3.0-1SP-US-40

Бренд: SMA Страницы: 7

SB3.0-1SP-US-40

Бренд: SMA Страницы: 17

Бренд: JBL Страницы: 8

Бренд: Quickie Страницы: 108

Бренд: Skov Страницы: 68

Бренд: Mandik Страницы: 34

Room System SRS-Lync-XL

Бренд: SMART Страницы: 2

AUDEMAT FM PROBE

Бренд: Worldcast Systems Страницы: 80

Бренд: Tarfire Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды