SkyWave SG-7100, Руководство по оборудованию

Страница: 43 / 56

SG-7100 - Hardware Guide
© SkyWave Proprietary 31 T300, Version 01
3.3.1 Insert a Single SIM Card
Ensure you have an activated SIM card with a cellular data plan from your solution
provider before continuing.
1. Disconnect any power to the unit.
2. Use a T6 Torx screwdriver to remove the four screws from the panel containing the
power connector and reset button (Figure 29). Remove the panel once you have
removed the screws.
Figure 29 Remove Panel
3. Push and release any existing SIM card (Figure 30) to remove it from the SIM card
holder.
Figure 30 Remove the SIM Card
4. Insert your activated SIM card into the slot, circuit-side down and the notch facing
away from you and to the left. Listen for the click to make sure it is securely in place.
Note: The SIM card is cut at an angle so it can only fit into the tray in one
direction.
Use the T6 screwdriver to
unscrew these four screws
Push and release the existing
card to remove it