REV. 1-8-19 Page 35
Square Flat Disc Fire Pits
This fire pit instruction provides an option to mount the TMSI face plate to concrete board.
Use the template above to complete the installation.
The TMSI face plate can be mounted vertically or horizontally. Our suggestion is to attach
the face plate in a horizontal position with the gas valve on the left side. This allows the
control knob text to be orientated in a position to be easily read.
Note:
Mounting plate can
also be installed into a paver control panel (PAVER-CP-TMSI) bracket system.
Using scissors carefully cutout the template and trace it on your concrete board. The
dotted line provides the cutout area to mount face plate. Use a concrete drill bit to drill (4)
3/16” diameter holes. Install the 1¼” screws through the front of the faceplate with the
nuts and washers on the backside. These are all provided in the hardware bag.
CAUTION
: Careful not to over-tighten screws and nuts to ensure the cement board does
not crack or break.
Optional Cutout Template for
TMSI Face Plate
f i r e - p a r t s . c o m
