Skymsen SI-282HD, Инструкция по эксплуатации

Страница: 11 / 20

08
4. 1. 2 Warnings
The On/Off Switch position shall be well known, to allow at any moment a fast
switching, without the necessity to look for the Switch .
Before any maintenance, take away the cord plug from the electricity network
socket.
Have enough working space around the Band Saw to avoid dangerous falls .
Water or oil may turn the floor slippery and dangerous. To avoid accidents keep
the floor dry and clean.
Never inadvertently touch or operate a manual command (button , switch, etc).
If any kind of work has to be done by two or more people, coordination signals
shall be accorded for each step of the work. The next step shall not be started unless the
signal is given and acknowledged .
4. 1. 3 Notices
In case of an electric energy supply failure, switch off the On/Off Switch.
Avoid mechanical shocks, since they may cause failures or wrongs to the Band
Saw good operation.
Avoid water, dirt or dust inside the mechanical or electrical components.
DO NOT ALTER the Band Saw original characteristics.
DO NOT SOIL, TEAR OR REMOVE, ANY SAFETY OR IDENTIFICATION
LABEL. If a label is illegible or lost, ask your Technical Assistant to supply a new one.
READ CAREFULLY AND WITH ATTENTION THE SAFETY OR OPERATION
INSTRUCTIONS LABELS DISPLAYED ON THE MACHINE, AS WELL AS THE
INSTRUCTION MANUAL AND THE TECHNICAL CHARACTERISTICS WRITTEN
INSIDE.
4. 2 CARES AND OBSERVATIONS BEFORE TO SWITCH
ON THE BAND SAW
IMPORTANT
Read carefully and with attention the present insturctions before to switch ON
the band saw. Be sure to have a right undestanding of all information given in
the instruction manual. In case of doubt, consult the technical assistant or the
seller.