10/09/2021
9/16
E_MH_Mounting_instructions_Skylux_Climaglide_10mm_carrier_system
Measuring your Climaglide glass sliding partition
Make sure the opening is perfectly square. The sill into which the lower rail is screwed must be perfectly level to
allow the sliding partition system to work properly. If the deflection of the upper profile (gutter) is more than 20
mm, the glass sliding partition cannot be installed. Bear in mind that the lower and upper rails are X times 20 mm
wide. A system with 3 tracks is therefore 60 mm wide. The stanchion on the parking side against which the glass
sliding partition is installed must have at least the same depth.
Determining the dimensions
Measure the
width (Bp)
between the posts.
Measure the
height (Hg)
from sill to gutter and check whether this corresponds to the sliding partition ordered.
The height (Hg) in the middle of the opening and at the side may differ by a maximum of 20 mm. Bear in mind that
the deflection of the gutter may be greater when loaded with snow. The maximum height Hg is 3000 mm. The
maximum weight of the glass is 80 kg.
The package delivered with the profiles and accessories is prepared with the greatest care in accordance with the
dimensions provided. First check that you have received all the parts.
post
gutter or gutter rafter
post
