10/09/2021
11/16
E_MH_Mounting_instructions_Skylux_Climaglide_10mm_carrier_system
Specific installation tips
Upper rail (CGT)
Check whether the upper profile can be anchored without perforating the gutter itself. As far as possible, it must
therefore be possible to anchor the profile in the rearmost part of the gutter profile.
Pre-drill upper profile with Ø 5-6 mm with a gap of approximately 70 cm and 4 cm from the ends. Give each hole
a chamfer so that the screw head is sunk.
Use countersunk screws to secure the profile (not supplied).
In the case of the GX gutter (Climalux), always do this in the first slot.
In the case of a GL gutter (Climalite), always do this in the second slot.
In the case of a GDG gutter (Climax Panorama), do this staggered in the first and third slots.
In the case of a GXLX gutter (Climalux Horizon), always do this in the second slot.
CGT310
CGT410
CGT510
Climalux
CGT + GX
Climalite
CGT + GL
Climax Panorama
CGT + GDG
Climalux Horizon
CGT + GXLX
