10/09/2021
7/16
E_MH_Mounting_instructions_Skylux_Climaglide_10mm_carrier_system
Use and versions
Climaglide is a glass sliding partition for single glazing. This system can be locked on the inside, and provides some
protection against wind and rain. The sliding elements can be slid open to 1 or 2 sides, creating a large opening.
Climaglide is suitable for closing a non-thermal break conservatory roof such as Climax Panorama, Climalux and
Climalite.
The lower rail (CGB) has 3,4 or 5 tracks (X), is fully pre-drilled and supplied on a custom basis.
A glass sliding partition consists of several sliding elements (YY). The left and right side are determined based on
an inside position.
With a single system, the sliding elements can be parked either to the left (L) or to the right (R).
With a double system, half the sliding elements are set to the left, half to the right. The bottom rail is pre-drilled
twice beneath the track at the inside. This allows you to lock the system from the inside.
The glazing is provided by the customer/fitter in toughened (tempered) glass with a thickness (D) of 10 mm.
The version of your Climaglide glass sliding partition is determined by a code CG XYY L/R D:
Example:
CG 303 L 10 is a Climaglide glass sliding partition with 3 tracks and 3 sliding elements that open to the left (seen
from the inside out). It is equipped with a glass thickness of 10 mm.
CG 408 LR 10 is Cllimaglide glass sliding partition with 4 tracks and 8 sliding elements that partly to the right. It is
equipped with a glass thickness of 10 mm.
OUTSIDE
INSIDE
park side
CGB lower rail
CGSH
sliding lock
CGL10
side profile
