background image

 

CABANA / PAVILION ASSEMBLY 

ALUMINUM FRAME MODELS 

 

Thank you for selecting Tropitone® Basta Sole® Cabana / 
Pavilion for your shade needs.

 

WARNING:

 Do not try to lift or flip Cabanas / Pavilions with only 

one person. Components may be heavy and awkward to handle, 
and may result in injury to persons or damage to property if not 
lifted properly.  

CAUTION:

 When instructed to fully tighten screws, do not over 

tighten and strip the threads.

 

  Read through all steps before starting assembly. 

  Completely unpack all boxes and thoroughly check for 

items that may be individually wrapped (finial, etc.)   

Tools needed:  

Medium (#2) Phillips Screwdriver 
7/16” Combination Wrench 
3/16” Hex Key 
3/8” Power Drill 

5/16” Drill Bit 
Level 
Safety Glasses 

 

Parts List:  

(1)    Finial (decorative top) 
(4)    ¼-20 x 1-1/4” Flat Head 

Screws 

(4)    Curtain Rod Brackets 
(8)    ¼-20 x 3” Socket Head 

Screws 

(8)    ¼-20 x 2-1/2” Socket 

Head Screws         

(8)    ¼-20 x 1-3/4” Socket 

Head Screws 

(48)  ¼” Flat Washers 
(24)  ¼-20 Locking Nuts 

(1)  Upper Frame Assembly with 

Top Cover 

(4)  Corner Bracket Assembly 
(4)  Curtain Rods (longer, 

thinner) Sheer 

Double

 

Curtain Rods (Optional) 

(4)  Curtains 
(8)    Sheer Curtains (Optional) 
(4)    Center Curtain Ties 
(4)  Corner Poles (shorter, 

thicker) 

(4)  Umbrella Bases (see Step 5 

for various types) 

Assembled  cabanas 
are  large  &  heavy. 
Assemble at place of 
use

 

Step 1 

CAUTION: 

To avoid damage to the finish of your Cabana frame, 

prepare a smooth, non-scratch work surface (shipping container, a 
tarp or pool towels can be used). 
 
 
Set the (4) Corner Bracket Assemblies in a 
square spaced at a distance to accept the 
length of the Curtain Rods. 

Connect the (4) Curtain Rods to the Corner 
Bracket Assemblies in such a way that the 
assembly hole for the Curtain Rod Bracket 
is located at the top and outside of the 
frame (shown in diagram 

A)

. This will allow 

the Curtain Rod Bracket (installed in 

Step 2

to receive the Arm as shown in the cutaway 
diagram in the Step below. Curtain Rods 
with a secondary sheer rod will require the 
smaller sheer rod to be oriented to the 
inside of the assembled Cabana (Optional 
Sheer Curtain Rod shown in diagram 

B

). 

Note:

 Curtain Rods and Sheer Curtain 

Rods for 12’ Cabanas are equipped with a 
Valance Support located in the center of the 
curtain rod. 
 
Slide Rods 

fully

 onto the end tube of the 

Corner Brackets. Install (8) ¼-20 x 2-1/2”  
Socket Head Screws with (8) ¼” Flat 
Washers into pre-drilled thru holes of the 
Curtain Rods loosely to retain the Corner 
Brackets (at 4 corners). Secure with (8) ¼” 
Flat Washers and (8) ¼-20 Locking Nuts. 

 

Do NOT fully tighten the Socket Head 
Screws and Locking Nuts until Step 3.

  

Содержание Basta Sole Cabana







Отзывы: