9
Step 5
(Continued)
Step 6
Curtains are installed outside the
Poles using Loops with snaps to
secure to the Curtain Rods.
Curtain Mounting Tabs and
Bottom Ties face towards inside
of Cabana with one Tie Panel on
each side of the Corner Pole at
bottom.
To hang the Curtain, open Curtain Top
Flaps by gently releasing the snaps
and pulling apart. Install the Curtain
Top Flaps over the Curtain Rod. Close
the Flaps and engage the snaps.
Wrap the Bottom Curtain Tie (attached
to the curtain at bottom center) around
the Corner Pole and engage the
Velcro at the ends of the Bottom
Curtain Tie.
10
Step 6
(Continued)
To secure the Curtain to the center of
the Corner Pole, secure the Center
Curtain Tie to the Curtain by pressing
the (2) Snap Studs on the Center
Curtain Tie through the (2) holes in the
Curtain Mounting Tab. Engage the
snap sockets to the snap studs from
the Center Curtain Tie through the
Curtain Mounting Tab located in the
center of the curtain (Mounting Tab
shown at lower right).
Fully open the Curtains and tie back
by engaging the Velcro at the ends
of the Center Curtain Ties.
Optional Sheer Curtains are to be
hung on the optional Sheer Curtain
Rod in the same manner as the
standard Curtains but without
wrapping around the Corner Pole.
Sheer Curtain Rod