5
PrOgrAmmINg FOr INdIvIduAL OPErATION
Individual operation allows you to use one of the buttons from 1 to 9 to control one
specific light or appliance. To program a remote to the receiver module, a “Learn”
code must be transmitted. Follow the instructions below to transmit a “Learn” code
to the receiver module.
You may use the following table to fill in the lights or small appliances you would
like to control and their related zones. This will give you a clear direction during the
programming process.
Number
Button
Lights
Zone
1. Put the receiver module that you plan to program into programming mode.
Refer to the User’s Instructions of that receiver module.
2. During the standby mode, the LCD display
will show the current time. Press the
[PROG] button once to enter the Individual
Programmingmode. The Signal icon [ ]
and red LED stays on for 15 seconds.
Signal icon
Содержание TD-318
Страница 1: ...Model TD 318 User s Instructions LCD Deluxe Remote ...
Страница 15: ...14 ...
Страница 16: ...15 101Z946 rev 4 DEC 2012 ...