8
4. The red LED light will be on. The Scene icon, Signal icon and Settings icon will
stay on for 15 seconds, allowing you to program this scene to the receiver
module.
5. Put the receiver module that you plan to program into programming mode.
Refer to the User’s Instructions of that receiver module.
6. Once the receiver module is in programming mode, press the Scene number
button on the remote, i.e. [1] for Scene 1. The Red LED will flash light then
off. You have now programmed a Scene 1 signal with 60% brightness to
the receiver module. The LCD display will continue to show the setting for
Scene 1 with the brightness setting flashing.
7. As most scene settings involve multiple lights with different brightness, you
may change the brightness again and program the same scene to another
receiver module.
8. After programming all the scenes, you may press the [PROG] button
twice to return to clock mode.
scene Operation:
To turn on a scene:
1. Press the Function button “ ” until you see
“scene on”.
The SCENE icon and ON icon will stay on
in the LCD display.
2. Press [1 – 9] to select the desired scene, i.e.
Enter [1] for Scene 1 and all the lights in
Scene 1 will be on at the preset brightness.
To turn off a scene:
1. Press the Function button “ ” until you see
“scene off”.
The SCENE icon and OFF icon will stay
on in the LCD display.
2. Press [1 – 9] to turn off the scene,
i.e. Enter [1] to turn off all the lights in
Scene 1.
Содержание TD-318
Страница 1: ...Model TD 318 User s Instructions LCD Deluxe Remote ...
Страница 15: ...14 ...
Страница 16: ...15 101Z946 rev 4 DEC 2012 ...