background image

the rated load, e.g. covers, drains, and trenches.

•  DO  NOT

  operate  an  MEWP 

that has ladders, scaffolding or 
other devices mounted on it to 
increase its size or work height. 
It is prohibited.

•  DO  NOT

  exert  side  forces  on 

MEWP while elevated.

•  DO  NOT

  use  the  MEWP  as  a 

crane. It is prohibited.

•  DO NOT

 sit, stand or climb on 

the guardrails. It is prohibited. 

•  DO NOT 

climb on scissor arm 

assembly. It is prohibited.

•  AVOID

 overhead obstructions. 

Be 

aware 

of 

overhead 

obstructions  or  other  possible 
hazards  around  MEWP  when 
lifting or driving. 

•  AVOID

 crushing hazards. Be 

aware  of  crushing  hazards 
when  lifting  or  driving.  Keep 
all  body  parts  inside  the 
MEWP. 

•  DO  NOT 

  raise  the  MEWP 

while the MEWP is on a truck, 
fork  lift  or  other  device  or 
vehicle. 

•  DO  NOT

  lower  the  platform 

unless the area below is clear 
of personnel and obstructions.

•  ENSURE

  that  there  are  no 

personnel  or  obstructions  in 
the  path  of  travel,  including 
blind spots.

•  BE  AWARE

  of  blind  spots  when  operating  the 

MEWP.

•  DO  NOT 

use  with  improperly 

inflated/damaged 

tires 

or 

wheels.  Refer  to 

Section  2: 

Wheel/Tire Assembly.

•  ENSURE

  ALL  tires  are  in 

good  condition  and  bolts  are 
properly tightened.

•  DO  NOT

  alter  or  disable 

limit  switches  or  other  safety 
devices.

Safety Precautions (Continued)

Know and understand the safety precautions before going on to next section.

SJIII 4740

Page 9

Section 1 - About Your Aerial Platform 

Safety Rules

Содержание SJIII 4740































































































Отзывы: