Skyjack SJIII 4740 Скачать руководство пользователя страница 25

Страница: 25 / 94

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

2.4 Function Tests

Function tests are designed to discover any malfunctions
before MEWP is put into service. The operator must
understand and follow step-by-step instructions to test
all MEWP functions.

WARNING

Never use a malfunctioning MEWP. If
malfunctions are discovered, MEWP must
be tagged and placed out of service.
Repairs to MEWP may only be made by

a qualified service technician.

After repairs are completed, operator must perform a
pre-operation inspection and a series of function tests
again before putting MEWP into service.

Prior to performing function tests, be sure to read and
understand

Section 3.8 - Start Operation.

2.4-1 Test Main Power Disconnect Switch

1. At rear of the base, turn main power disconnect

switch to “

” off position.

Result:

MEWP functions should not operate.

2.4-2 Base Control Console

WARNING

Ensure that you maintain three points of
contact when using the ladder to mount/

dismount platform.

1. Use the ladder of MEWP to access platform.

2. Close the gate.

3. On platform control console, pull out “

”

emergency stop button.

4. Use the ladder to dismount from platform.

5. Turn main power disconnect switch to “ ” on

position.

SJIII 4740

(Back View)

Platform/Off/Base
Key Switch

Main Power

Disconnect Switch

AMILIARIZA

TION

Lower/

Neutral/Raise

Switch

Free-wheeling
Valve

Brake Hand
Pump

Brake Auto-Reset
Valve Plunger

Emergency Stop

Button

SJIII 4740

Page 25

Section 2 - Familiarization

Function Tests

Содержание SJIII 4740































































































Результаты поиска

Содержание SJIII 4740

Отзывы:

Похожие инструкции для SJIII 4740

Бренды по названию

Популярные бренды

Skyjack SJIII 4740, Руководство по эксплуатации

Результаты поиска

Содержание SJIII 4740

Отзывы:

Похожие инструкции для SJIII 4740

Бренды по названию

Популярные бренды