Skyjack SJIII 4740, Руководство по эксплуатации

Страница: 29 / 94

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
• Test Driving
1. Ensure path of intended motion is clear.
2. Activate and hold “ ”enable trigger switch.
3. Slowly move controller handle in “ ” forward
direction until MEWP begins to move, and
then return handle to center position.
Result: MEWP should move in forward
direction, and then come to a stop.
4. Slowly move controller handle in “ ” reverse
direction until MEWP begins to move, and
then return handle to center position.
Result: MEWP should move in reverse
direction, and then come to a stop.
• Test Brakes
WARNING
Brakes will engage instantly when
you release the enable trigger switch,
causing MEWP to stop immediately.
1. Ensure path of intended motion is clear.
2. Activate and hold “ ” enable trigger switch.
3. D r i v e M E W P “ ” f o r w a r d a n d t h e n
“ ” backward. Test brake by releasing
controller handle.
Result: MEWP should come to a stop. If
MEWP pulls to one side while stopping, do
not operate MEWP until brake adjustments
have been checked.
4. D r i v e M E W P “ ” f o r w a r d a n d t h e n
“ ” backward. Test brake again by releasing
“ ” enable trigger switch only.
Result: MEWP should come to an instant
and abrupt stop. If MEWP does not stop
immediately, or if MEWP pulls to one side
while stopping, do not operate MEWP until
brake adjustments have been checked.
F
AMILIARIZA
TION
Platform Control Console
Lift/Drive/Steer Enable
Trigger Switch
Inclined Drive/Level Drive
Switch
Lift/Off/Drive Switch
Horn Pushbutton
Emergency Stop Button/
Operation Light
Controller
Rocker Switch
SJIII 4740
Page 29
Section 2 - Familiarization Function Tests