Skyjack SJIII 4740, Руководство по эксплуатации

Страница: 55 / 94

Section 3 - Operation Guardrail Folding Procedure
15. Remove the remaining mid-rail pins from rear
guardrails:
×2 or ×4
Figure 3-21. Remaining mid-rail locking pin locations
NOTE
MEWPs equipped with the half gate option
have 2 pins to remove on the rear gate.
MEWPs equipped with the full gate option
have 4 pins to remove on the rear gate.
16. Hold the mid-rail with one hand and use the
other hand to fold down the rear gate. Refer to
Figure 3-22 for hand positions. Lock into place
by installing pins
8
. Ensure the detent ball of
the pin is all the way through.
Figure 3-22. Fold down the rear gate.
17. Remove locking pins from extension guardrail
9
. Hold the mid-rail with one hand and fold
down the guardrail with the other hand (refer to
3-22 for hand positions). Insert pin
10
to lock
the guardrail into place on the mounting post.
Ensure that the detent ball of the pin is all the
way through.
9
10
Figure 3-23. Fold down the extension guardrail and
lock in place.
8
8
SJIII 4740
Page 55