83
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 2.0
Document No. 97014401
SKS-Kinkel Elektronik GmbH
300111 und 300112 IP Gateway II Family and Business
EN
Tap on “End call” to stop the transmission of speech
and the video image.
To avoid ending a call by mistake you have to confirm
again that you want to end the call.
Within two minutes after the call is ended you can
initiate the door opener via the app.
To do so keep hold of the button “Open door” for a
few seconds.
If the button is not held long enough you will receive
the following message:
When holding the button a green ring starts filling all
around the button. Keep hold of the button until the
green ring is complete to open the door. Only then
you will receive the following message:
10 Technical data
Standard support for built-in IP telephone systems
SIP
Over 5060 or 5061 TCP
RTP
Via dynamic ports
Audio
uLaw 8bit@8khz
Video
H.264 BP/H.264 BP/CBP, earlyMedia via jpeg-Stream or rather pro
-
prietary
DTMF key tones
Out-of-band, SIP Info, SIP Info per "application/dtmf-relay"
General data
Video resolution
768 x 576 pixels
Working temperature
0°C to +45°C
Humidity
20% to 90%, non-condensing
Housing
Plastic housing for DIN rail mounting
Measurements (width x height x depth)
107 x 103 x 72 mm incl. terminals (6 TE)
Protection type
IP20
Electrical data
Power consumption active/stand-by
5.0 W/1.6 W
Network connection
RJ45, 100 Mbit/s, IPv4 (DHCP/static)
Necessary open ports (outgoing)
80, 443, 9000, 53 (DNS), 123 (NTP)
Nominal input voltage
24 VDC
Nominal input current
Maximum of 300 mA