General comments
8
•
If the information “
SAFE
” appears in the display after switching on the unit, it
can only be operated again by entering the correct code
⇒
page 15.
Button
With the navigation system there is the possibility to record traffic information over
a period of 2 and/or 24 hours. Up to nine traffic reports with a total duration of
maximum 4 minutes can be automatically recorded.
The TP stations always record traffic reports during operation, also if the play func-
tion is aborted by pressing the button
. In the case of EON stations, also the
recording is aborted.
If the system is switched off, the reports are only recorded if the function TIM is acti-
vated.
Activate 24 hour TIM readiness
•
If the system is switched off and the ignition key is withdrawn, hold the button
pressed for a few seconds.
Activate 2 hour TIM readiness
•
Withdraw the ignition key when the system is switched on and the vehicle is
stationary. The recording readiness is deactivated by switching the system on.
Note
•
The 24 hour TIM readiness leads to an increased power consumption over 24
hours. This can lead to problems with the voltage of the vehicle battery, if the
vehicle is only driven on short distances. In this case the 24 hour TIM readiness
should not be activated.
•
The oldest traffic information will be overwritten if the traffic information
memory is full. If a report lasts more than four minutes, the beginning of this report
is overwritten.
Button
The display contrast can be set with the button
.
– Press the button
.
– The contrast can be set by pressing the menu knob
.
– Confirm the set value by pressing the menu knob
.
Button
With the button
incoming traffic reports can be displayed in the display
via the
TMC
(
T
raffic
M
essage
C
hannel - traffic message channel). These reports are
used by the navigation system for the dynamic route guidance, if this option is
active
⇒
page 29.
The number of received traffic reports is shown below the display “
TMC
” through
corresponding points.
If the button
is pressed, a text appears in the display. In the standard field
- background - of the display
⇒
page 9, fig. 2
the number of the indicated report
and the number of stored reports is shown behind “
TRAFFIC INFO
”.
To change in-between individual reports, turn the menu knob
.
Note
The TMC function is only available if a navigation CD has been inserted. Reports are
deleted after 15 minutes, if they are not received again. If there is no report, a corre-
sponding note is displayed in the display.
Button
Mute the audio sources by pressing the button
. “
AUDIO OFF
”
is shown on the display.
– Press the button
again or turn the rotary/push knob
to
switch the mute function on/off.
TIM
FM
A
2
TIM
A
3
DSP
DSP
A
9
DSP
A
25
A
25
TELE
TELE
A
13
TELE
A
13
A
25
MUTE
MUTE
A
15
MUTE
A
15
A
19
s2ck.7.book Page 8 Friday, April 20, 2007 12:38 PM
