General comments
10
Display contents
The display shows the following content:
selected audio source,
selected memory space,
name of the selected station,
display that the set station is a TMC station as well as the number of received
traffic reports,
arrival time,
selected route option (here dynamic),
distance to destination,
direction arrow,
distance to the next decision point,
name of the currently driven road.
Alarm
If your navigation system receives a disaster announcement, “
ALARM
” is displayed
in the standard field - foreground - of the display. The display appears in the
standard field - background during active route guidance.
The play function of the active audio source is interrupted and the navigation
system switches over to the corresponding radio station that is receiving the
disaster announcement.
The play function of the announcement is perfomed with the volume
⇒
page 13
set for traffic information.
At the end of the announcement it switches back automatically to the last active
audio source.
You can end the traffic information at any time by switching over to another audio
source or setting another station.
Telephone
If your vehicle is equipped with a “hands-free system*”, the voice play function of
the telephone is performed via the navigation system.
If the telephone is activated, the audio sources are switched to mute. “
PHONE
” is
displayed on the display.
After the end of the conversation, the audio play function is continued.
Note
If the navigation system is switched off, it switches on automatically when activating
the telephone. The display is not switched on. You can phone as before. After the
end of the conversation, the navigation system automatically switches off again.
Fig. 3 Display overview
A
A
A
B
A
C
A
D
A
E
A
F
A
G
A
H
A
I
A
J
s2ck.7.book Page 10 Friday, April 20, 2007 12:38 PM
