Skoda RADIO NAVIGATION SYSTEM SATCOMPASS - FOR SUPERB, Руководство пользователя

Страница: 18 / 43

Audio 17
Store station
– Select the desired range and the level using the button ,
or
– Set a station.
– Hold the station selection button pressed on the station which
should be stored, until the station is switched to mute.
Automatically store station
– Select the memory level (FM, TMC or AM), in which the stations
should automatically be stored.
– Hold the button pressed until the automatic storing begins
and “ A-STORE ” is shown in the standard field - status range - of the
display. Additionally a progress display in percentage is shown in the
standard field - foreground - of the display.
– The stations with the strongest reception are stored automatically on
level 2 (FM2, TC2 or. AM2) of the set range. The order of the stored
stations depends on their station code.
Note
•
In the current range you can select up to six stations with the strongest recep-
tion using the button .
•
An
Autostore
for TMC stations can take 10 minutes, as all receiveable stations
are checked for their TMC compatibility. At this time no radio mode is possible.
Retrieving the stored stations
– Select the desired range and the level using the button ,
or
– Briefly press the station selection button under which you have
stored the station.
You can also call up the stored stations by pressing the button .
Note
•
If a stored FM station is no longer receivable and the TA function is activated in
the “ SETUP AUDIO ”, “ TP-SEEK ” is shown in the display after pressing the station
selection button , a finding is started and the radio play function is switched to
mute. If no TP station is receivable, a signal tone sounds and “
NO TP
” is shown in
the display In such a case the function TA switches off
⇒
page 13.
•
If a stored TMC station is no longer receivable, “ TMC-SEEK ” is shown in the
display. If no TMC stations are receivable, “ NO TMC ” is shown in the display. In such
a case select an FM station.
•
If no TMC stations are received, a dynamic route guidance is not possible.
Replay recorded traffic information
After pressing the button , “ TRACK ” and the number of the last
recorded information is shown in the standard field - foreground - of the
display. In the standard field - status range - of the display the time of the
recording is shown next to the source display. If no information was
recorded, “
NO MESSAGE ” is shown in the standard field - foreground - of
the display.
Select recorded traffic information
– Press one of the buttons while replaying a recorded traffic infor-
mation, in order to listen to the previous or the next one.
Fast station finding (audible)
– In order to play the information faster, press one of the buttons
while replaying.
FM
A
2
TMC
A
5
AM
A
6
A
22
AS
A
20
AS
A
20
FM
A
2
TMC
A
5
AM
A
6
A
22
A
14
A
22
TIM
A
3
A
1
A
14
s2ck.7.book Page 17 Friday, April 20, 2007 12:38 PM