Page 40 of 56
SKIPPER
Electronics AS
Edition: 2021-09-16
ESN100 Operation and Installation Manual
Chapter: ESN100 Screen functions
Other information can be shown on the side parameter, these are from the NMEA inputs or from other sys-
tems connected via LAN. (e.g. DL2 speed sensor)
These include:
- Auto
Alert Deep
The value when a deep water alert or warning will
sound
Draft
The distance from the surface to the lowest point of
the keel
Depth below surface
The depth value from surface to the bottom
Depth below keel
The depth value from the lowest point of the hull
Depth below transducer
The depth value to the bottom from the face of the
transducer
Speed from GPS
Speed over ground from a connected GPS
Speed from LOG
Speed over ground from a connected log
STW from log
The Speed through water from a connected log
Rate of turn
The Rate of turn from a connected gyro
Depth from Log
The depth measured by the log sensor
All adjustments are available from the menus by pressing
Config
Depending on which transducers are connected, the user can switch between transducers or frequency using the
navigate arrows
. The current transducer frequency and position is shown in the
text under the depth
.
