SKILTEC 9E DUETTE SKYLIFT POWERVIEW SYSTEM, Руководство по эксплуатации товара

Страница: 7 / 29

PRODUCT INFORMATION MANUAL
SECTION: 9E DUETTE
®
SKYLIFT POWERVIEW
®
SYSTEM
ISSUE DATE: NOVEMBER 2017 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: APPROVED BY: R.BOKTOR PAGE 7
Insert the Top Tension Plates in Place
IMPORTANT:
Make sure the bottom rail and the bottom corner bracket with the “R” sticker are
placed on the right side before beginning the assembly.
■
Position the left side rail close to the top rail.
■
Orient and insert the top left tension plate in the slot in the top corner bracket on the left
side rail.
TIP: Tilt the screwhead up to insert the top tension plate first, then insert the screwhead in
place.
■
Place a strip of tape over the screwhead to
keep the screw in place.
■
Repeat the above steps on the right side.
■
If there are more than two tension cables:
Make sure all the top tension screw(s) and the
top tension plate(s) are in place.