SKILTEC 9E DUETTE SKYLIFT POWERVIEW SYSTEM, Руководство по эксплуатации товара

Страница: 27 / 29

PRODUCT INFORMATION MANUAL
SECTION: 9E DUETTE
®
SKYLIFT POWERVIEW
®
SYSTEM
ISSUE DATE: NOVEMBER 2017 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: APPROVED BY: R.BOKTOR PAGE 27
Problem Adjacent shades do not stack evenly.
Solution If one shade is stacking tighter than another, it may have been reset. Lower and
raise the shades to loosen the stack. The shade stack on both shades should be
within 8mm of each other.
Reset the shade. See “Resetting the Shade” on page 22.
Problem
The shade operates slowly.
Solution Replace the batteries in the battery wand(s). See “2. Refer to “Joining a Shade
to a Group” on page 21 to program the shade to a group.” on page 2423.
Larger shades use a different internal gear box and may move at the half the
speed of smaller shades.
Problem
There is some slack in the drive belt.
Solution The drive belt should have some slack when the shade is stacked. This is normal.
Tightening the tension screws will not remove the slack.