SKILTEC 9E DUETTE SKYLIFT POWERVIEW SYSTEM, Руководство по эксплуатации товара

Страница: 18 / 29

PRODUCT INFORMATION MANUAL
SECTION: 9E DUETTE
®
SKYLIFT POWERVIEW
®
SYSTEM
ISSUE DATE: NOVEMBER 2017 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: APPROVED BY: R.BOKTOR PAGE 18
Mount the Shade
■
Slip the upper portion of the
shade into the window frame.
Make sure the installation
brackets fit into the notches
on the plastic hooks (inset).
■
Slip a screwdriver behind the shade and push back the
brackets to install the lower
end of the shade.
■
Additional holes are punched in the side rails 200mm
from
each corner. You may attach the side rails to the window
frame using the provided extra screws.
IMPORTANT: Do not overtighten these screws. Doing so
can cause the side rails to bow in and prevent the shade
from operating correctly.
NOTE:
Additional screws can be added to secure the larger
shades. If you choose to use more screws, drill installation
holes on the screw indicator grooves in the side rails.
Attach the Corner Covers
■
Remove the adhesive backing from the corner covers.
■
Press a cover onto each shade corner, extending them to
the window frame to cover the light gap.
If you have the wall or ceiling mounted satellite battery pack or the DC
power supply,
proceed to “Finish Mounting the Power Supply” on page 19
or “Finish Mounting the Power Supply” on page 21 21.
Screw Indicator
Grooves
Corner
Cover