SKF Spandau Pumpen PSR 02, Руководство по сборке и соответствующее руководство по эксплуатации, Страница: 7 / 32

1. Safety information Page 7
EN
1. Safety information
Please observe the following safety information in
order to ensure the trouble*free operation of the
pump and to prevent damage.
The operator of the described product
must ensure that the assembly
instructions are read and understood by
all persons who are involved with the
assembly, operation, maintenance, and
repair of the product. This assembly
manual must be kept close at hand.
Note that this assembly manual is an
integral part of the product. It must be
handed over to the new operator of the
product if the product is sold.
The described product was manufactured in
accordance with all generally acknowledged
regulations pertaining to technology, occupational
safety, and accident prevention. However, dangers
that can cause physical injury to persons or
damage to other material assets might still occur
during the use of the product. This product should
therefore only be used if it is in a technically perfect
state and with full observance of the information
provided in this assembly manual.
In particular, malfunctions that might affect the
safety of the product must be rectified
immediately.
Appropriate safety measures must be implemented
in accordance with the characteristics of the
conveyed media.
The provided safety functions must not be
damaged, taken out of services, made useless, or
replaced by any parts other than those expressly
approved by SKF Lubrication Systems Germany
GmbH.
In addition to the information provided
in this assembly manual, all generally
valid regulations on accident prevention
and the environment must be observed.
1.1 Intended use
All products manufactured by SKF
Lubrication Systems Germany GmbH
may only be used as intended and in
accordance with the specifications in the
assembly manual for the product in
question.
Spandau Pumps immersion pumps are multi*stage
centrifugal pumps for conveying oils, mineral
emulsions, and emulsions with synthetic lubricating
coolants without abrasive or long*stranded
components.
They are designed to be installed in a vertical
position.
Any other use of this product constitutes improper
use.
Only media approved for this pump type
may be conveyed. The use of unsuitable
media can cause the pump to fail and
may result in serious damage to
property or injury to persons.
You must not carry out alterations to
the product or use non*original spare
parts or resources. Doing so invalidates
the statutory guarantee.
Worn*out units must be placed in a state that
prevents them from being used and must then be
disposed of in the appropriate manner.