SKF Spandau Pumpen PSR 02, Руководство по сборке и соответствующее руководство по эксплуатации, Страница: 19 / 32

8. Shutdown Page 19
EN
The pump may only be used within the prescribed
delivery range. See the pump's rating plate for the
relevant key data.
The fluid level can drop down to the suction opening
if the pump is operated without interruption. You
must ensure that the fluid level does not drop
further whilst the pump is being operated.
Otherwise, it could run dry.
Whilst the pump is at a standstill, the fluid level must
not be allowed to drop below the minimum level
specified in the "Positioning" section of the "Assembly
instructions" chapter. If the fluid level is lower than
the permitted minimum when the pump is started
up, there is a risk of it running dry.
The pump must not be allowed to run
dry, since this could damage it.
8. Shutdown
8.1 Temporary shutdown
You temporarily shut down the described product by
disconnecting the electrical and hydraulic supply
connections. For more information, see "General
information" in this assembly manual.
If you wish to shut down the product for a longer
period of time, refer also to the instructions in the
section "Transport, delivery, and storage" of this
assembly manual.
When placing the product back into operation, pay
attention to the information in "Assembly
instructions" and "Commissioning and operations" in
this assembly manual.
8.2 Definitive shutdown
All regional legal guidelines and legislation on the
disposal of contaminated equipment must be
observed when shutting down the product for the
final time.
Lubricants can contaminate the ground
and watercourses. Lubricants must be
used and disposed of properly. Regional
regulations and laws on the disposal of
lubricants must be observed.
In exchange for the incurred costs, SKF Lubrication
Systems Germany can take back the product and
arrange for its disposal.