SKF Spandau Pumpen PSR 02 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 32

SKF Spandau Pumpen PSR 02 Скачать руководство пользователя страница 32

Page 32

EN

Order number: 951?170?031

We reserve the right to make changes!

This documentation and parts thereof may only be reprinted with the express permission of SKF Lubrication Systems Germany GmbH. The specifications given in
this brochure are checked for accuracy with the greatest of care. However, we do not accept liability for any losses or damages of whatever kind that arise directly or
indirectly from the use of the material contained herein.

All SKF Lubrication Systems Germany GmbH products may only be used as intended and as described in this assembly manual and corresponding operating manual.
If assembly/operating instructions are delivered with your products, read them carefully and follow them.

Pump units which are marketed by SKF Lubrication Systems Germany GmbH are not approved for use in conjunction with gases, liquefied gases, gases dissolved
under pressure, vapours, and fluids with a vapour pressure of more than 0.5 bar above normal atmospheric pressure (1013 mbar) at the maximum permitted
temperature.
Note that hazardous substances of any kind and * in particular * the substances that are classed as hazardous in accordance with EC Directive 67/548/EC Article 2,
Paragraph 2 may only be inserted into and conveyed/distributed by central lubrication units and components following consultation with SKF Lubrication Systems
Germany GmbH and with the express written permission of the company.

SKF Lubrication Systems Germany GmbH

Product range Spandau Pumpen

Berlin Plant
Motzener Straße 35/37
12277 Berlin
Germany
Tel. +49 (0) 30 72002*0
Fax +49 (0) 30 72002*261

[email protected]
http://www.spandaupumpen.de/en

«
...
30
31
32

Содержание Spandau Pumpen PSR 02

































Отзывы:

Нет отзывов