manualshive.com logo in svg

SKF LAGD 1000 series, Инструкция по эксплуатации

Поделиться
Скачать
SKF LAGD 1000 series Скачать руководство пользователя страница 4

4

SKF LAGD 1000

EC Declaration of conformity

We, 
 

SKF Maintenance Products

 

Kelvinbaan 16

 

3439 MT Nieuwegein

 

The Netherlands

declare that the:

Multipoint automatic lubricators LAGD 1000 series

conforms to the essential protection requirements set out in the Directive(s) of
the Council for harmonization of the member states’ legal regulations.

• 

Electromagnetic compatibility 89/336/EEC through application of the 
following (harmonized) European standards in respect to the Directive(s) 
EMC89/336/EEC 
61000-6-2 
61000-6-3

 
•  

Electrical equipment tor use within certain voltage limits (Low-voltage  
directive) 73/23/EEC through application of the following (harmonized) 
European standards in respect to the Directive(s) 
Low voltage 73/23/EEC 
EN 60204-1 
EN 60034-1

•  

This declaration certiies conformity with the aforementioned directives, 
but does not contain any assurance of properties.

•  

The safety instructions in the documentation included with the product 
must be observed.

•  

Operation of the products on non-standard mains voltage as well as 
nonobservance of installation instructions can affect the EMC properties 
and electrical safety.

•  

The certiied products must not be started up until it is assured that the 
machine, in which the product was installed, meets the provisions and 
requirements of the directives to be applied.

In addition, the Multipoint automatic lubricators LAGD 1000 series
 
•  

Is in accordance with EC Machinery Directive 98/37/EC, Appendix 11B 

 

intended for installation in a machine / for assembly with other  

Содержание LAGD 1000 series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды