SKF CMSS6165, Руководство пользователя

Страница: 18 / 65

Introduction to the SKF Strobe Light
Display Panel / Definition of Buttons
1 - 6 Strobe Light
User Manual
Definition of Buttons
Below the display are six buttons which control the
operation of the StroboLite. They are as follows:
Multiplies flash rate by 2 times
ALT Function - Starts Menu
Hold when powering up to show all segments, then
Rev # and display test
Divides flash rate by 2
Hold when powering up to reset factory defaults
In Internal/External Mode - Toggles display between
RPM and RPS. In External Phase or Time Delay Mode
- Cycles display through RPM, RPS, Phase and Time.
In Auto Mode - Cycles display through RPM, RPS,
VRPM and VRPS.
ALT Function - Toggles Tach Mode (flashing) on/off
Manually cycle through Internal, External, Wide Lock,
and Narrow Lock Modes
ALT Function - Memory - Reads and Stores 9 preset
flash rates
Activates Alternate Function for buttons (lower
section) and knob
The
ALT FUNCTION button toggles ALT. in the
display. When ALT. is displayed, the buttons will
perform their secondary function listed in the lower
section of each button. It also changes how the tuning
knob works.
In Internal Mode, toggles between normal flash rate
adjust and “phase” delay adjust
In External and Lock Modes, cycles through External
only (no delay), Phase, Time and Auto (VRPM)
ALT Function – In Lock Mode, toggles Filter tracking