SKF CMSS6165, Руководство пользователя

Страница: 41 / 65

Applications
Balancing and Phase Measurement
Strobe Light 5 - 5
User Manual
Headphone (CMAC 5078) and Strobe
Adapter kit (CMAC 5402). Reference
the Audio Headphone and Strobe
Adapter User Manual for connection
details.
¾
For CMVA Series Micrologs, you will
need to use the included phase
adapter (CMSS6135E) and strobe
light cable (CMSS50278-CE).
The vibration transducer provides the signal the
strobe uses as a phase trigger source and is the input
to the strobe. The vibration transducer also provides
the vibration signal to the Microlog. The interface
cable provides a “TEE” connection to both. The strobe
provides the phase referenced tachometer signal
(output), which is used as a TTL input to the Microlog
for triggering.
• Follow the operating instructions outlined at the
beginning of this section for tuning the strobe to
1X running speed.
• After the reference mark has been “frozen” (as
nearly as possible, but slight rotation is
acceptable). press the
INPUT / MEMORY
button until the LOCK icon displays. The flash
rate is now derived from the vibration
transducer. Phase information is only valid
when operating in
LOCK mode.
Press the PHASE DELAY button until PHASE is
shown on the display. Using the control knob, position
the reference mark to a convenient reference location.
The Microlog can now be employed to receive and
process the phase information as supplied to it by the
strobe and the transducer. After the information is
received, simply release the trigger on the strobe,