Strobe Light
4 - 1
User Manual
4
How to Operate the Strobe Light
Powering on the Strobe Light
To turn on the stroboscope:
•
Depress and hold the trigger.
•
Lock the trigger in position using the side locking
button.
•
To lock the stroboscope on, depress the
trigger as far as it will go and then press
the locking button. Once the locking
button is set you may release the trigger
and the trigger will be held in place.
•
To unlock the stroboscope, simply depress
the trigger and then release.
Operating Modes
The Strobe Light has five operating modes:
Internal
- Knob adjusts the flash rate.
External Input
- External signal is used to trigger the
flash and the knob has no effect.
External Delay
(Phase, Time and Auto (Virtual
RPM))
-
Enable the user to vary the stopped motion
image at any point in the cycle without having to move
the trigger source location. The Lock modes use the
signal from an accelerometer / input source.
¾
All require an external input signal,
except Internal mode.
Содержание CMSS6165
