SKF CMSS6165, Руководство пользователя

Страница: 21 / 65

Strobe Light 2 - 1
User Manual
2
Preparation for Use
The Strobe may be hand held or mounted on a tripod
or other user supplied bracket using the ¼-20 UNC
bushing at the base of the handle.
Power
The Strobe Light has internal rechargeable batteries
and may also be powered by an external AC power
supply. If using the internal batteries, the unit should
be charged before use (see
Chapter 8, Charging the
Batteries
). The actual operating time of the
stroboscope depends on the flash rate and duty cycle
of operation. The strobe can also be run continuously
from the AC mains with the power supply supplied
(see
Chapter 8, External Power Supply / Charger
).
Input / Output Connections
The Strobe Light has input and output jacks on the
left side of the stroboscope. These can be used for
external triggering or synchronization (daisy chaining
two or more strobes). These jacks accept 1/8" (3.5
mm) phone plugs (input – stereo, output – mono).
The input and output are TTL compatible. See
Figures 2 and 3 for connector connection detail.