SKF AWAIV-12, Руководство пользователя

Страница: 189 / 250

11) If the EAR percentage is under or equal to the tolerance, the background of the Ref-
Bar EAR box will be white, indicating a pass.
12) When satisfied with the waveform release the Lead 1 button or footswitch. The EAR
percentage will be saved and an inset bar graph will be displayed depicting the EAR
percentage versus the test bar. If the bar failed, the EAR bar on the graph will be
red.
13) Up to three waveforms can be saved per test.
14) If the bar fails or is of interest, click on one of the
Save button at the top right of the
screen and that wave form will be saved along with its bar number.; otherwise, only
the reference-to-bar EAR percentage will be saved.
15) Continue to move the test fixture to the next bar and repeat steps 10–14 for each
bar until all bars have been tested. A maximum of 1,024 bars can be tested.
16) If at any time before you save the full test results you want to retest a bar, you can
enter that bar number in the Bar Control field or use the up and down arrows to
navigate to the bar number and retest as needed. Retesting will overwrite the
previous data for that bar. The Total Bars Tested number gives you the number of
the last bar tested. Add one to that number to resume testing where you left off.
17) After all bars have been tested, click the Close button. The Test view will be
displayed as shown below.
18) Because this is not an automatic test, you must click on the yellow Save Results
button to save the test results to the database so it can be recalled for further
viewing and printing reports.
Figure 147. Test view.
SKF Static Motor Analyzer—Baker AWA-IV User Manual 175
Using the Baker ZTX with Baker AWA-IV analyzers