SKF AWAIV-12, Руководство пользователя

Страница: 100 / 250

4) Click on the Add button. The Create New Test ID dialog box appears.
5) Click on the Add Blank Test ID radio button.
6) Enter the Test ID. For this example, enter Delco_460/wPI.
Figure 85.
Test ID input.
7) Using the dropdown box, select a Target Motor Voltage Class. For this example,
choose the existing voltage class of 460. If it does not exist, you can create a new
one by typing 460 in the edit box of the dropdown list.
8) If a new voltage class type has been entered, enter a description and click on the Add
Voltage Class button. A dialog box will appear asking if this action is correct. If it is,
click OK . This will close the Create New Test ID dialog box.
9) The new Test ID will be displayed and all tests are turned off. The Tests tab will
resemble the example shown below.
10) Turn on all required tests by clicking the ON/OFF buttons in the left-most column.
The buttons turn green when they are on.
Figure 86. New test window.
86 SKF Static Motor Analyzer—Baker AWA-IV User Manual
Test procedures