SKF 655-41261-1, Руководство по эксплуатации

Страница: 76 / 94

- 76 - 951-181-014-EN
Version 16
EN
12. Repairs
12.1 Replacement of capacitive sensor
The instructions refer to res-
ervoirs with terminal box.
Reservoirs without terminal box
are disassembled electrically in
accordance with the local con-
nection situations.
To replace the capacitive sensor proceed as
follows:
•
Check the new sensor for accordance
with the documentation and the intended
purpose.
•
Implement the safety measures as speci-
fied in the warning notice at the begin-
ning of this chapter.
•
Open the reservoir lid (1) on the two locks
(17) and remove it.
Make sure not to damage the
earthing cable when removing
it or later when mounting the
reservoir lid.
•
Open the terminal box (8) by unscrewing
the 4 screws (18) and disconnect the two
cores of the cable.
Replacement of capacitive sensor Fig 11
Exi
17
17
1
8
19
18
19
21
22
23
20