SKF 655-41261-1, Руководство по эксплуатации

Страница: 11 / 94

1
- 11 -
951-181-014-EN
Version 16
EN
1. Safety instructions
1.6 Modifications of the product
Unauthorized conversions or modifica-
tions may result in unforeseeable impacts
on safety. Therefore, any unauthorized
conversions or modifications are expressly
prohibited.
1.7 Prohibition of certain activities
Due to potential sources of faults that may
not be visible or due to legal regulations the
following activities may be carried out only
by manufacturer specialists or persons au-
thorized by the manufacturer:
○
Repairs or changes to the drive
○
Replacement of or changes on the pis-
tons of the pump elements
1.8 Inspections prior to delivery
The following inspections were carried out
prior to delivery:
○
Safety and functional tests
○
Electrical inspections following DIN EN
60204-1:2007 / VDE 0113-1:2007.
○
In case of explosion-protected products:
Inspections following the requirements of
the ATEX Directive.
1.9 Other applicable documents
In addition to these instructions, the follow-
ing documents must be observed by the
respective target group:
○
Operational instructions and approval
rules
○
Safety data sheet of the lubricant used
Where appropriate:
○
Project planning documents
○
Any documents of other components
required to set up the centralized lubrica-
tion system
○
Operator's explosion protection
document
○
Rehfuss gear:
Instructions for the SM type series
○
SEW motor:
Explosion-protected three-phase motors
EDR71 documentation no.: 19402007
○
CEMP motor:
ATEX safety instructions (multilingual)
Instructions for use and maintenance
(multilingual)
1.10 Markings on the product
Warning of dangerous electrical
voltage
Warning of hand injuries when
reaching into the reservoir
Rotational direction of the pump
Equipotential bonding
connections