SKF 655-41261-1, Руководство по эксплуатации

Страница: 48 / 94

EN
6. Installation
- 48 - 951-181-014-EN
Version 16
6. Installation
6.1 General information
Only qualified technical personnel may
install the products described in these
Instructions.
During assembly pay attention to the
following:
○
Other units must not be damaged by the
assembly.
○
The product must not be installed within
the range of moving parts.
○
The product must be installed at an ad-
equate distance from sources of heat and
coldness.
○
Observe the product's IP type of
protection.
○
Adhere to safety distances and legal pre-
scriptions on assembly and prevention of
accidents.
6.2 Place of installation
Protect the product against humidity, dust
and vibrations and install it in an easily ac-
cessible position to facilitate other installa-
tion and maintenance works.
○
Possibly existing visual monitoring de-
vices, e.g. pressure gauges, MIN/MAX
markings or piston detectors, must be
clearly visible.
○
Observe prescriptions in the Technical
data (chapter 4) regarding the installation
position.
WARNING
Risk of explosion
When carrying out installation
works on explosion-protected
machines, observe the legal and
operational prescriptions.
If the works are not carried out by
the manufacturer, authorized and
qualified personnel only is allowed
to carry out such works. Works then
have to be reviewed by a qualified
and officially recognised person.
Any installation work may be car-
ried out only provided there is no
explosive atmosphere at the place
of installation.