SKF 655-41261-1, Руководство по эксплуатации

Страница: 47 / 94

5
EN
5. Delivery, returns, and storage
- 47 -
951-181-014-EN
Version 16
5.4 Special storage conditions for parts
primed with lubricant
The conditions mentioned in the following
will have to be adhered to when storing
products primed with lubricant,
5.4.1 Storage period of up to 6 months
The primed products can be used without
having to take further measures.
5.4.2 Storage period from 6 to 18
months
Pump
•
Connect the pump electrically.
•
Switch the pump on and let it run until
about 4 cc of lubricant will leak from each
pump element.
•
Switch the pump off and disconnect it
from the electrical grid.
•
Remove and dispose of leaked lubricant.
Metering device
•
Remove all connection lines and closure
screws, if any.
•
Connect the pump primed with new
lubrication grease suitable for the appli-
cation purpose to the divider bar in such
way that the opposite port of the divider
bar remains open.
•
Let the pump run until new lubricant
leaks from the divider bar.
•
Remove leaked lubricant.
•
Reinstall closure screws and connection
lines.
Lines
•
Dismantle preassembled lines.
•
Ensure that both line ends remain open.
•
Prime lines with new lubricant.
5.4.3 Storage period exceeding 18
months
To avoid dysfunctions consult the manufac-
turer before commissioning. The general
procedure to remove the old grease filling
corresponds to that of a storage period from
6 to 18 months.