manualshive.com logo in svg

Sizewise 36060100, Руководство пользователя, Страница: 51 / 56

Поделиться
Скачать
Sizewise 36060100 Скачать руководство пользователя страница 51

50

 

Troubleshooting 

CAUTION: 

Only  authorized  personnel  should  engage  in  the  troubleshooting 

process.  Troubleshooting by unauthorized persons could result in personal injury 

or equipment damage. 

The bed will not operate with all functions unresponsive: 

One or more functions fail to operate, the motor(s) will not activate: 

Bed

 fails to lift or recline fully:

•

Inspect all mechanical components to make sure they are free of any obstacles that

may restrict movement and are in good working order.

NOTE:

  If  the  troubleshooting  process  does  not  solve  the  problem  please  contact  a  SizeWise 

representative for service. 

•

Ensure bed is plugged into power source and battery fully charges.

•

Make sure all cables are properly connected and secure.

•

Controller indicator light illuminates green.

•

Check Attendant Control, verifying all Lockouts are deactivated.

•

Ensure all cables are properly connected and secure.

•

Inspect Hand Pendant for damage and ensure it is properly connected to Controller.

•

Check Attendant Control, verifying all Lockouts are deactivated.

Bed quits after repeated use.

•

Actuators may have overheated, wait 10 minutes to cool and try bed again.

Bed 

ceases operation and automatically engages "

lockout

"

 

function

.

•

2 manual lockout release options are available and depicted in the following

 

figures.

 This

feature is in place to eliminate un-intended movement of the bed.

On the Attendant Control Board: 

Simultaneously press the Master lock 

button and the CPR button and hold for 5 seconds. The lockout will release.

On the Hand-held Controller: 

Simultaneously press the up  arrow for the 

head section and the up arrow for the foot section and hold for 5 seconds. 

The lockout will release. 

Содержание 36060100

























































Отзывы:

Нет отзывов