Sizewise 36060100 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 56

Sizewise 36060100 Скачать руководство пользователя страница 22

21

Side Rails

Powder Coated and Chromed Side Rails:

To lower, pull knob out and move the side rail to the desired

position. The knob is spring loaded, release it and it will

automatically lock back into position.

To remove, pull knob out and lift side rail out of mount.

WARNING:

If the side rails are not secured in the proper place, entrapment to

the patient may occur. Bed rail entrapment is a serious health risk that can result

in serious injury or even death. Sizewise recommends the care provider be

mindful of the FDA guidelines relevant to bed rail entrapment, as serious injury

can result. These guidelines can be found on the FDA website. It is the care

provider’s ultimate decision whether or not to use bed side rails with the patient.

Never try to move the bed by the side rail. The side rails may come loose or

break.

The side rails are not designed to bear the full weight of the patient. The safe working load for

each side rail has been determined to be 150 lbs. (68 kg).

The side rails were tested to 60601-2-38 (28.4.102 and 28.4.103). These rails also have been

tested and comply with patient entrapment rules and regulations (23.101). See Safety

Tips Section on Bed Entrapment (page

WARNING:

Exceeding the 150 lb. (68 kg) weight capacity of the side rails

could result in patient and/or user injury as well as damage to equipment or other

property.

Transfers

WARNING:

Follow the instructions for transferring patients to avoid a fall or

injury to the patient and/or care provider.

Transfers require good balance and agility and are very dangerous. The care provider should

learn how to position the body and support himself or herself during a patient transfer.

The care provider should work with the patient’s doctor, nurse or therapist to learn safe transfer

methods.

«
...
20
21
22
23
24
...
»

Содержание 36060100

























































Отзывы:

Нет отзывов