Sirona SIROLaser Xtend Скачать руководство пользователя страница 7

Страница: 7 / 78

Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend

2 Safety information

2.1 Identification of danger levels

63 18 351 D3576
D3576.201.01.05.02 11.2018

Safety information

2.1

Identification of danger levels

To prevent personal injury and material damage, please observe the
warning and safety information provided in this document. Such
information is highlighted as follows:

WARNING

Warning of bodily injury

For a possible danger that could result in light to serious bodily injury
or death.

CAUTION

Caution against damage

For a possibly harmful situation which could lead to damage of the
product or an object in its environment.

NOTE

Information to make work easier

For application information and other useful information.

2.2

Standards and regulations

For the installation and operation of the SIROLaser Xtend, Sirona
Dental Systems GmbH requires:

● compliance with IEC 60825-1 and its amendments,

● observance of any supplemental national laws and regulations.

Public legal requirements may include special safety regulations
concerning protection against laser radiation. These requirements must
be fulfilled.

The SIROLaser Xtend is manufactured in compliance with the
provisions of Council Directive 93/42/EEC (MDD) concerning medical
devices.

National directives regarding electrical installations must be observed.

Содержание SIROLaser Xtend















































































Результаты поиска

Содержание SIROLaser Xtend

Отзывы:

Похожие инструкции для SIROLaser Xtend

Бренды по названию

Популярные бренды

Sirona SIROLaser Xtend, Руководство по эксплуатации

Результаты поиска

Содержание SIROLaser Xtend

Отзывы:

Похожие инструкции для SIROLaser Xtend

Бренды по названию

Популярные бренды